- Use the tape to stick the 1:1 layout template on the place you would install the LED backlit signs
- Drill the holes for the stud bolts and cable on the backing wall as the 1:1 layout template shows you
- Remove the 1:1 layout template from the backing wall
- Make the stud bolts holes be filled with structural adhesives
- Screw the stud bolts into the acrylic back-panel of the LED backlit signs 10mm~15mm
- Make the cable of the individual part of the LED backlit signs through the cable holes
- Push the individual part of the LED backlit signage with the stud bolts into the stud bolt holes
- If you can work on the another side of the wall, it is best to use a washer and nut to secure the stud bolts to the wall.
- Link all cables together in parallel as the “WIRING DIAGRAM” shows you
- Link the cables of the LED backlit signs to the output of the AC transformer as the “WIRING DIAGRAM” shows you
- Link the input of the AC transformer to your AC power as the “WIRING DIAGRAM” shows you
- Turn on the AC power
- Using the nylon cable ties to make the cables to be well-organized